Effect of solvent type on chemical composition distribution analysis of polyolefins using crystallization elution fractionation (CEF)

Published in: Polymer, Vol 309, 127434
Authors: Thipphaya Pathaweeisariyakul (a), Lalita Bangtai (a), Alberto Ortin (b)
a. Thai Polyethylene Co. (Bangkok, Thailand)
b. Polymer Char (Valencia, Spain)

August 2024
View the Publication Online

Abstract:

For microstructure characterization of polyolefin by separation-based techniques with infrared detector, either 1,2-dichlorobenzene (o-DCB) or 1,2,4-trichlorobenzene (TCB) is commonly selected as a dissolution solvent and mobile phase. Herein, we studied the effects of o-DCB and TCB on the comonomer detection and chemical composition distribution (CCD) by crystallization elution fractionation (CEF) with a filter-based IR detector. We first compared the detector sensitivity on methyl group content or short chain branching (SCB) in polyethylene-co-butene with varied sample concentrations in o-DCB and TCB. TCB demonstrated superior comonomer detection in the IR detector with a single linear calibration across a wide range of sample concentrations. In contrast, o-DCB displayed stronger concentration dependent methyl group response, requiring a more complex equation in the calibration. Furthermore, o-DCB provided better separation of comonomer distribution with less peak broadening and co-crystallization effects, as observed with various polyolefins, including high density polyethylene (HDPE), linear low-density polyethylene (LLDPE), polypropylene (PP), and ethylene-propylene copolymer (EP).