GPC analyses allow the customer to obtain the molar mass distribution of a polymer resin. When performed by GPC-QC instrument, rapid columns are used and high molar masses polyolefins can be analyzed in a short time. GPC-QC incorporates the best detector for polyolefins, the IR5, which is used as Concentration and Composition detector to obtain the Molar Mass Distribution curve and SCB information and Viscometer, to obtain the Intrinsic Viscosity Distribution as well.
A report is sent to the customer with the Molar Mass distribution curve, the analysis conditions used as well as the calculations of Mn, Mw… An Excel file with the raw data can also be sent when required.
The following are some results of analyses performed by GPC-QC:
Two polypropylenes with a similar Molar Weight but completely different Short Chain Branching content.
1 x Rapid PL column (250x10mm 20um)
Flow rate: 1 mL/min
Concentration: 0.5 mg/mL
Dissolution time: 30 min
Shaking: 400 rpm
These detectors are also used in some of our GPC-QC analyses:
When analyzing HDPE pipe resins, high sensitivity is required to be capable of measuring the low number of branches accurately. IR5 MCT detector was designed for this specific purpose and it is very powerful when characterizing that kind of resins.
The IR6 Detector is the latest IR Detector developed by Polymer Char with same capabilities and features than IR5 detector and the additional capability of measuring carbonyls group in the band of 1740 cm-1. IR6 Detector is recommended for users willing to analyze polyolefin type EVA, EBA, and others with carbonyls group present in IR band above.
By connecting a capillary Viscometer to a high-temperature GPC when analyzing polyolefins, the bulk Intrinsic Viscosity (IV) can be determined. The IV is provided as a function of Molar Mass (MM), and then the Universal Calibration (UC) is applied, for samples with different molecular structures. The viscometer signal provides Long Chain Branching results too.
To calculate your cost, please use the base amount (‘Concentration’ in this case) and then add the corresponding amount as per any additional detectors you want to be used.
|GPC-QC (Price/Sample)||First Sample||Additional Samples|
|Composition (IR5 MCT)||305€||246€|
|Minimum sample amount||>1 g|
The fractionation service is available thanks to the Instruments PREP mc2 and PREP C20, capable of fractionating samples by molecular weight or by composition (TREF or CRYSTAF). Please visit the link Preparative Fractionation for more information.
The resulting fractions are later analyzed by the corresponding technique (GPC or TREF/CRYSTAF) to check the good performance of the fractionation process. Finally, the physical fractions are sent back to the customer by courier service as well as the analysis results of the fractions, so the customer can check the separation.
If you have any question about the information included in the report, please do not hesitate to contact us at email@example.com
Please send an email to firstname.lastname@example.org and we will be pleased to help you.
To order any analytical service, please fill in the Analytical Service Request Form. Provide all the information available about the samples to be analyzed. Sent forms will be processed as formal orders for Polymer Char records. All the information provided is considered confidential information.
If a previous quotation is required, please do not hesitate to let us know by sending an email to email@example.com
Samples should be shipped to:
Polymer Characterization S.A.
Valencia Technology Park
Gustave Eiffel 8
Attn.: Analytical Services Department
We highly recommend to use courier service instead of post mail to ensure your samples arrive in good condition.
The standard response time is 3 weeks. This time is approximate and depends on the analysis queue in the laboratory at the time of the order. Polymer Char will inform the customer at the time of the order in case the response time is expected to be longer.
Urgent services (results sent within 10 days from the samples receipt) might be requested with a 50% surcharge. Please consult with Polymer Char the availability of this service and delivery time at the time of the order.
Please refer to our Analytical Services Terms and in the first chapter, you will find the necessary amount for each technique.
Polymer Characterization, S.A. is committed to respecting and protecting your privacy and the personal data that you may provide to Polymer Characterization, S.A. www.polymerchar.com. Polymer Characterization, S.A. acts in full compliance with the Spanish Law Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal (the Law on the Protection of Personal Data). Therefore, in case you access parts of the website where you can provide personal data (e.g. Contact Form or Press Mailing List) your personal data will be processed and kept in strict accordance with the relevant legislation. You can exercise your rights of access, correction, cancellation of opposition by writing to Polymer Characterization, S.A. to firstname.lastname@example.org or to 8 Gustave Eiffel Str., Paterna, E-46980 Valencia, Spain.
Thank you for your interest. If you would like to receive more information or want to request a quotation please complete this form.