Analytical Logo Analytical Logo

Chemical Composition Analysis by CEF

Overview

The Crystallization Elution Fractionation (CEF) technique is based on the crystallization concept combining the power of Crystallization Analysis Fractionation and Temperature Rising Elution Fractionation to get the separation of the different components of the polyolefin at a significantly lower time.

This service is performed with our CEF instrument, which performs the sample preparation in a fully automated way, from dissolution to the injection into the CEF column. After the injection, a dynamic crystallization cycle and then a fast elution cycle is performed by the Instrument to measure the resulting solution in the concentration detector.

Depending on the analysis conditions applied and the desired resolution, results can be obtained in time periods as low as 30 minutes per sample.

Additional Detectors

These detectors also used in our GPC-IR analyses:

IR4

IR4

The standard detector used on this analysis is a dual-wavelength infrared detector, which uses the principle of infrared absorption spectroscopy to measure the concentration and composition in polyolefins.

Composition by IR5

Composition by IR5

When analyzing HDPE pipe resins, high sensitivity is required to be capable of measuring the low number of branches accurately. IR5 MCT detector was designed for this specific purpose and it is very powerful when characterizing that kind of resins.

IR6

IR6

The IR6 Detector is the latest IR Detector developed by Polymer Char with same capabilities and features than IR5 detector and the additional capability of measuring carbonyls group in the band of 1740 cm-1. IR6 Detector is recommended for users willing to analyze polyolefin type EVA, EBA, and others with carbonyls group present in IR band above.

Viscometer

Viscometer

By connecting a capillary Viscometer to a CEF when analyzing polyolefins, the bulk Intrinsic Viscosity (IV) can be determined. The IV is provided as a function of Molar Mass (MM), and then the Universal Calibration (UC) is applied, for samples with different molecular structures.

CEF Analytical Services Fees

To calculate your cost, please use the base amount (‘Standard’ in this case) and then add the corresponding amount as per any additional detectors you want to be used.

CEF (Price/Sample)1-5 samples6-10 samples>10 samples
Standard (2-4-1)629€516€472€
High-throughput (8-4-1/ 5-10-0.5)440€387€310€
Additional Detectors:
Chemical Composition216€181€181€
Intrinsic Viscosity216€181€181€
Molar Mass by Light Scattering475€399€399€
Calibration for Chemical Composition IR5229€ (only for the fist sample)
Calibration for Intrinsic Viscosity134€ (only for the first sample)
Calibration for Molar Mass134€ (only for the first sample)
Additional Services:
Crystallization 0.5 room temperature162€133€122€
Crystallization <0.5 room temperature211€173€158€
Crystallization 0.5 subambient432€354€324€
Crystallization <0.5 subambient562€461€421€
Subambient322€322€322€
Sample Filtration (carbon black)219€219€219€
Standard Data Re-processing109€109€109€
Patent Interpretation300€
Minimum sample amount>1 g

Terms & Conditions

Analytical Services Frequently Asked Questions


The fractionation service is available thanks to the Instruments PREP mc2 and PREP C20, capable of fractionating samples by molecular weight or by composition (TREF or CRYSTAF). Please visit the link Preparative Fractionation for more information.

The resulting fractions are later analyzed by the corresponding technique (GPC or TREF/CRYSTAF) to check the good performance of the fractionation process. Finally, the physical fractions are sent back to the customer by courier service as well as the analysis results of the fractions, so the customer can check the separation.

For most of our analyses, you will receive a summary of the results along with an Excel file. However, the type of data and report form depends on the analytical service made. For specifics about the information sent, contact analyticalservices@polymerchar.com.

Please send an email to analyticalservices@polymerchar.com and we will be pleased to help you.

To order any analytical service, please fill in the Analytical Service Request Form. Provide all the information available about the samples to be analyzed. Sent forms will be processed as formal orders for Polymer Char records. All the information provided is considered confidential information.

If a previous quotation is required, please do not hesitate to let us know by sending an email to analyticalservices@polymerchar.com

Samples should be shipped to:

Polymer Characterization S.A.
Valencia Technology Park
Gustave Eiffel 8
Paterna, Valencia
E-46980, Spain
Attn.: Analytical Services Department

We highly recommend to use courier service instead of post mail to ensure your samples arrive in good condition.

You will receive the results in less than a week. If you plan to send more than 10 samples, please check with our lab, as the response time may be longer in this case.
This time is approximate, and it depends on the service queue in the laboratory at the time of the order. Polymer Char will inform the customer if the turnaround time is expected to be longer.

Please refer to our Analytical Services Terms and in the first chapter, you will find the necessary amount for each technique.

Polymer Characterization, S.A. is committed to respecting and protecting your privacy and the personal data that you may provide to Polymer Characterization, S.A. www.polymerchar.com. Polymer Characterization, S.A. acts in full compliance with the Spanish Law Ley Orgánica 15/1999, de 13 de diciembre, de Protección de Datos de Carácter Personal (the Law on the Protection of Personal Data). Therefore, in case you access parts of the website where you can provide personal data (e.g. Contact Form or Press Mailing List) your personal data will be processed and kept in strict accordance with the relevant legislation. You can exercise your rights of access, correction, cancellation of opposition by writing to Polymer Characterization, S.A. to marketing@polymerchar.com or to 8 Gustave Eiffel Str., Paterna, E-46980 Valencia, Spain.

This Privacy Policy affects as well to the Customers’ Samples’ Analysis’ results. If a Privacy Agreement is required by the Customer, please contact us.

For more information about Polymer Char’s Privacy Policy and Terms of Use please click here.

Request a Service

Thank you for your interest. If you would like to receive more information or want to request a quotation please complete this form.

    * Required fields

    This site uses cookies to give you a better browsing experience. If you continue browsing this site we understand that you accept our use of cookies.
    For more information, please visit our Cookies Policy. You can configure which cookies you accept by ticking the next options: